-35%
Visionare Electric Table Tavola Tripla
Clinical spaces are often crowded. For every one device that can stay in the exam room, there are 3 or 4 more in storage. Due to convience, often the heaviest and/or most used items claim precious counter space. This leaves clinicians with few options. Devices can be moved between storage and the exam room counter with every use. However, this puts the equipment at risk of falling, which can destroy delicate optics and electronics and potentially harm the user. Otherwise, clinicians must either crowd the existing counters or get additional exam space, neither of which are optimal or even feasible. The Tavola Tripla motorized table by Visionare solves these problems, offering ample table space and a convenient motorized lift system.
Beyond that, patients and clinicians vary wildly in height. As a result, ophthalmic instruments need to be at the right elevation to do the job, requiring the patient and the operator to adjust. For the patient, this means inconveniently being adjusted up and down in a seat. For the operator, this may require a step stool or craning over, potentially causing back strain. The Tavola Tripla motorized table by Visionare solves both of these problems, offering ample table space and a convenient motorized lift system.
The Tavola Tripla motorized table is a wheeled table with a motorized lift that can elevate or lower up to 3 pieces of equipment as needed. Its powerful lift can raise or lower up to 220 lbs from 26 in to 39 in with ease using an up/down switch tucked safely underneath the tabletop. This allows for easy access without accidental activations. This brings the devices resting upon it to the eye level of the user and the patient. Depending on the load size, the table changes elevation at 0.98 in/s at a minimum load and 14 mm/s at max capacity – safe for the user and equipment and convenient for the patient.
The Tavola Tripla can support up to 220 lb on the tabletop.
Three auxiliary power supply outlets are located inside the table top support box. These outputs are connected directly to the ignition switch. It means that the mains voltage is present at the outlets if the mains switch is set to the ON position.
The table Tavola Tripla provides easy access. Simply roll the table to your desired location and lock the wheels as needed.
Variety of colors on the table top and base
Therefore, the Tavola Tripla is the perfect option for exams and procedures that require multiple complementary pieces of equipment and is great for clinicians who value space and convenience.
Plane Tavola Tripla
Click here to see the brochure
Click here to see the manual
| Height (without table top) |
Min 27" Max 39" Stroke* 13" |
| Dimensions (without table top) | Width 36" Depth 20" Weight 59.4 lbs |
| Elevating Speed on Min/Max Load | 0.98 - 0.55 in/s |
| Capacity | Max 220 lbs |
| Capacity on One Elevating Column | Max 110 lbs |
| Height Adjustment Mechanism | Electrical |
| Height Adjustment Control | Up/down switch, sited under the table top |
| Power Supply Voltage/Frequency | 230 V ~ 50/60 Hz |
| Current Absorbed | 220-240 V~ version: max 1A |
| Current Absorbed with Connected Instruments | Max 4A |
| 2 Main Fuses Located in The Fuse-Holder Sited Below to Power Cord Socket | T 5A 250V 5x20 |
| Duty Cycle of Electrical Motor | Max 10%. After continuous operation of 2 min it must be cooled down for at least 18 min. |
| 3 auxiliary max 200W voltage power supply sockets for instruments | |
Plane Tavola Tripla
| Height (without table top) |
Min 27" Max 39" Stroke* 13" |
| Dimensions (without table top) | Width 36" Depth 20" Weight 59.4 lbs |
| Elevating Speed on Min/Max Load | 0.98 - 0.55 in/s |
| Capacity | Max 220 lbs |
| Capacity on One Elevating Column | Max 110 lbs |
| Height Adjustment Mechanism | Electrical |
| Height Adjustment Control | Up/down switch, sited under the table top |
| Power Supply Voltage/Frequency | 230 V ~ 50/60 Hz |
| Current Absorbed | 220-240 V~ version: max 1A |
| Current Absorbed with Connected Instruments | Max 4A |
| 2 Main Fuses Located in The Fuse-Holder Sited Below to Power Cord Socket | T 5A 250V 5x20 |
| Duty Cycle of Electrical Motor | Max 10%. After continuous operation of 2 min it must be cooled down for at least 18 min. |
| 3 auxiliary max 200W voltage power supply sockets for instruments | |
Plane Tavola Tripla
