Counter space is often limited in most clinical settings, and there are frequently more devices than available space to place them. Unfortunately, solutions to this problem tend to be unsatisfactory. Counters can simply be crowded with equipment, but this makes work more difficult, especially if a device is used infrequently. Devices can be transported back and forth from storage, but this carries a risk of drops that can destroy costly equipment and injure the user. Even once they are on a counter or table, ophthalmic instruments are often not at the correct height for the task, requiring both the patient and the operator to adapt to the equipment. The Visionare Tavola motorized table solves this problem by adapting to the patient’s position, not the other way around.
























































Configure your Visionare table
Choose a top and a base to see the combination.
Top
14 options
Base
4 options
The Tavola V-shaped table makes it a perfect form factor for corners or allows two instruments to be placed at a right angle. The motorized table is a wheeled table for examination rooms that includes a motorized lift to raise or lower the equipment as needed.

The height is controlled by an up/down switch located just below the board, allowing quick access without the risk of bumps or accidental activations. With its adjustable height ranging from 630 mm to 1030 mm, the Tavola V-Shape can meet the needs of most seated patients without asking them to adjust, providing them with greater comfort and the operator with fewer inconveniences. Additionally, the table rises or lowers at 30 mm/s, slow enough to protect delicate equipment yet fast enough to avoid wasting time.

The V-Shape Table can support up to 110 lb on the table surface.

The Tavola V-Shape table provides easy access. Simply move the table to the desired location and lock the wheels as needed.

With these features, options, and Visionare’s dedication to quality, the Tavola V-Shape table is the ideal solution for maximizing workspace without compromising comfort.

Dimensions

Specifications
| Height (without board) | Min*: 26" Max*: 39" Travel*: 13" |
|---|---|
| Dimensions (without board) | Width: 24" Depth: 16" Weight: 39.6 lbs |
| Board Dimensions | Width: 40.2" Depth: 17" Height: 0.98" |
| Lifting Speed | Load-dependent 0.8 - 1.2 in/s |
| Table Lifting Power | Max 110 lbs |
| Height Adjustment Mechanism | Electrical |
| Height Adjustment Control | Up/down switch, located beneath the board |
| Input Voltage/Frequency | 115/230 V ~ 50/60 Hz |
| Idle Current Draw | Version 220-240 V~: max 0.8A Version 115 V~: max 1.6A |
| Current Draw with Connected Instruments | Max 3A |
| Main Fuse Located in the Fuse Holder Situated Next to the Power Cable Plug | T 4A 250V 5x20 |
| Electric Motor Duty Cycle | Max 10%. After 2 min of continuous operation, it must cool down for at least 18 min. |
| 2 auxiliary voltage power outlets max 200W for instruments | May vary slightly |












