Counter space is often limited in most clinical settings, and there are frequently more devices than available space to place them. Unfortunately, solutions to this problem tend to be less than satisfactory. Equipment can simply be stacked on countertops, but this makes work more difficult, especially if the device is used infrequently. Devices can be moved back and forth from storage, but this carries a risk of drops that can destroy costly equipment and injure the user. Even once they are on a counter or table, ophthalmic instruments are often not at the correct height for the work at hand, requiring both the patient and the operator to adapt to the equipment. The Visionare Tavola motorized table solves this problem by adapting to the position of the patient, and not the other way around.
























































Configure your Visionare table
Choose a top and a base to see the combination.
Top
14 options
Base
4 options
The Tavola Singola is designed for a single instrument. The motorized table is a wheeled table for examination rooms that features a motorized lift to raise or lower the equipment as needed.

The height is controlled by an up/down switch located just below the table surface, allowing quick access without the risk of bumps or accidental activation. With its adjustable height ranging from 26 to 36 in, the Tavola Singola can meet the needs of most seated patients without asking them to adjust, providing them with greater comfort and the operator with fewer inconveniences. Additionally, the table rises or lowers at 1.2 in/s, slow enough to protect delicate equipment yet fast enough to avoid wasting time.

The Tavola Singola can support up to 110 lbs on the table surface.

The Tavola Singola table provides easy access. Simply move the table to the desired location and lock the wheels as needed.

Variety of colors for the table surface and base
With these features, options, and Visionare’s dedication to quality, the Tavola table is the ideal solution to maximize workspace without compromising comfort.

Dimensions
Specifications
| Height (without board) | Min*: 26" Max*: 39" Stroke*: 13" |
|---|---|
| Dimensions (without board) | Width: 24" Depth: 16" Weight: 39.6 lbs |
| Board Dimensions | Width: 25.20" Depth: 15.75" Height: 0.98" |
| Lifting Speed | Load-dependent 0.8 - 1.2 in/s |
| Table Lifting Power | Max 110 lbs |
| Height Adjustment Mechanism | Electrical |
| Height Adjustment Control | Up/down switch, located under the board |
| Input Voltage/Frequency | 115/230 V ~ 50/60 Hz |
| Idle Current Draw | Version 220-240 V~: max 0.8A Version 115 V~: max 1.6A |
| Current Draw with Connected Instruments | Max 3A |
| Main Fuse Located in the Fuse Holder Situated Next to the Power Cable Plug | T 4A 250V 5x20 |
| Electric Motor Duty Cycle | Max 10%. After 2 min of continuous operation, it must cool down for at least 18 min. |
| 2 auxiliary voltage supply sockets max 200W for instruments *May vary slightly |



















