Tables for Three Instruments
A table for three instruments is a motorized, height-adjustable exam-lane table built to carry up to three ophthalmic devices at once — for example an autorefractor, a lensmeter, and a non-contact tonometer, or a combined pre-test and screening cluster — so a single lane does the work of several stands. The powered lift brings each instrument to the correct working height for both the clinician and the seated patient, which cuts down the reaching and repositioning that add up across a full day of exams. Consolidating three instruments onto one stable, mobile surface also recovers floor space and keeps cabling and workflow organized in tighter rooms.
As a US ophthalmic and optometric equipment provider — not a reseller — US Ophthalmic stands behind these tables and the diagnostic instruments that sit on them, including our own EZER house brand, with in-house tech and repair, a stocked spare-parts department, and full US warranty and service. This collection focuses on the Visionare Tavola motorized tables engineered specifically for three-instrument lanes, so you can match load capacity, surface size, and power to your exam room and buy with support that stays local long after the sale.
How to choose a table for three instruments
- Surface size and layout: Measure your three instruments and confirm they sit side by side with working clearance. Three-instrument tops are wider than single or dual tables, and some models offer more than one width so you can size the surface to the lane.
- Lift capacity and column design: Add up the combined weight of all three instruments and keep it within the table's rated load. Heavier setups benefit from a dual-column lift that shares the load across two motors for smoother, more stable travel.
- Height range and ergonomics: Check the low-to-high stroke so the table seats comfortably for the clinician and lowers enough for shorter or wheelchair-using patients. A wider adjustment range is more forgiving across different staff and instruments.
- Power and cable management: Look for built-in auxiliary outlets so all three instruments can be powered cleanly from the table, and confirm the voltage matches US 110V service. Dual-voltage tables are the most flexible for mixed or relocating practices.
- Mobility and stability: A three-instrument table carries more weight than smaller stands, so lockable casters, a solid base, and a stable footprint matter for safely repositioning the lane without shifting the instruments.
- Service, warranty, and parts: Motors, controllers, and switches are wear items on any powered table. Choose one backed by accessible spare parts, in-house repair, and a US warranty rather than overseas-only support, so downtime is short and local.
Featured three-instrument tables
The Visionare Tavola line includes two motorized tables built specifically for three-instrument lanes. Both ride on a mobile, lockable base and use a powered lift; the table below highlights how they differ so you can match one to your room and instrument set.
| Model | Type | Best for |
|---|---|---|
| VS - Tavola 36 | Electric three-instrument table (Visionare) | Compact, dual-voltage three-instrument lanes that need a mobile, space-efficient surface |
| VS - Tavola Tripla | Motorized dual-column three-instrument table (Visionare) | Fuller lanes wanting built-in power outlets, a wider tabletop option, and greater height reach |
Frequently asked questions
What is a table for three instruments? It is a powered, height-adjustable exam-lane table sized to hold up to three ophthalmic instruments at once — commonly a pre-test or screening cluster such as an autorefractor, lensmeter, and tonometer, or a combination of diagnostic devices. The lift raises and lowers all three together to the correct working height for the clinician and patient.
How much weight can these tables support? The Visionare Tavola three-instrument tables are rated to a maximum load of 220 lbs. Before choosing, add up the weight of the three instruments you plan to mount and confirm the total stays within that rating, leaving some headroom for accessories and cabling.
What is the difference between a single-column and a dual-column three-instrument table? A dual-column table uses two lift columns to raise the top, sharing a heavier three-instrument load across two motors for added stability and smoother travel. A single-column design has a smaller footprint but suits lighter loads. Match the design to the combined weight of your instruments.
Do these tables run on standard US power? Dual-voltage models such as the VS - Tavola 36 operate on 110V/60Hz US service, and tables like the Tavola Tripla include built-in auxiliary outlets so all three instruments can be powered from the table itself. Always confirm the voltage and the number of outlets for your lane before ordering.
Should I buy new or refurbished, and who services the table? Whether you choose new or a refurbished unit, the moving parts — motor, controller, and switches — are what wear over time, so service access matters more than the sticker price. US Ophthalmic supports these tables through our in-house tech and spare-parts department with a full US warranty, so repairs and replacement components are handled locally.
