TL-266 Hi - US Ophthalmic
TL-266 Hi - US Ophthalmic
TL-266 Hi - US Ophthalmic
TL-266 Hi - US Ophthalmic
TL-266 Hi - US Ophthalmic
TL-266 Hi - US Ophthalmic
TL-266 Hi - US Ophthalmic
TL-266 Hi - US Ophthalmic
Load image into Gallery viewer, TL-266 Hi - US Ophthalmic
Load image into Gallery viewer, TL-266 Hi - US Ophthalmic
Load image into Gallery viewer, TL-266 Hi - US Ophthalmic
Load image into Gallery viewer, TL-266 Hi - US Ophthalmic
Load image into Gallery viewer, TL-266 Hi - US Ophthalmic
Load image into Gallery viewer, TL-266 Hi - US Ophthalmic
Load image into Gallery viewer, TL-266 Hi - US Ophthalmic
Load image into Gallery viewer, TL-266 Hi - US Ophthalmic

$1,100.00 $1,210.00


$1,210.00


Hurry, only 1 item(s) left in stock!
10 visitors are looking this product!

Trial Lens Set TL-266 HI luxvision - us ophthalmic

Spheres
The kit includes both concave (-) and convex (+) spherical lenses to examine myopia, hyperopia and presbyopia. Powers include ± 0.25D to ± 20.00D in 025D steps.

Cylinders
Examine astigmatism with the plus and minus cylindrical lenses included in the TL-266 Hi. Powers range from ± 0.25D to ± 6.00D.


Cross Cylinder Lenses
These lenses will help you examine the degree and axis position of the cylindrical lens when determining astigmatism.


Prisms
You can perform prism testing up to 10∆D with the TL-266 Hi Trial Lens Kit.


Frosted Lens
Use this semi-transparent cover lens for babies or outside of the room as an occluder.


Slit Lens
Examine astigmatism by turning this lens in front of the eye.


Color Lenses
The TL-266 Hi includes red, green, blue, yellow and dark brown lenses for use in examining color sensitivity. The lenses are especially helpful for use with cataract patients as well as in color blindness testing.


Additional Lenses
Maddox, plano, occluder and pin hole lenses are also included in the TL-266 Hi.


Trial Lens Set TL-266 HI luxvision - us ophthalmic


Security Case
Select from your choice of a leather or aluminum case with the TL-266 Hi. Both designs feature dual combination locks for security.

Details Specifications

Concave(-) Sphere Convex(+) Sphere Concave(-) Cylinder Convex(+) Cylinder Prism Accessory
List pcs List pcs List pcs List pcs List pcs List pcs List pcs Specifi-
cation
pcs
0.25 2 5.25 2 0.25 2 5.25 2 0.25 2 0.25 2 0.50 2 Maddax 1
0.50 2 5.50 2 0.50 2 5.50 2 0.50 2 0.50 2 1.00 2 Crossed fine 1
0.75 2 5.75 2 0.75 2 5.75 2 0.75 2 0.75 2 2.00 2 Pin hole 2
1.00 2 6.00 2 1.00 2 6.00 2 1.00 2 1.00 2 3.00 2 Occluder 1
1.25 2 6.50 2 1.25 2 6.50 2 1.25 2 1.25 2 4.00 2 Slit 1
1.50 2 7.00 2 1.50 2 7.00 2 1.50 2 1.50 2 5.00 1 Red filter lens 1
1.75 2 7.50 2 1.75 2 7.50 2 1.75 2 1.75 2 6.00 1 Green filter lens 1
2.00 2 8.00 2 2.00 2 8.00 2 2.00 2 2.00 2 8.00 1 Cross cylinder 1
2.25 2 8.50 2 2.25 2 8.50 2 2.25 2 2.25 2 10.00 1 Plane lens 1
2.50 2 9.00 2 2.50 2 9.00 2 2.50 2 2.50 2     Frosted lens 1
2.75 2 9.50 2 2.75 2 9.50 2 2.75 2 2.75 2     Double prisms 1
3.00 2 10.00 2 3.00 2 10.00 2 3.00 2 3.00 2        
3.25 2 11.00 2 3.25 2 11.00 2 3.25 2 3.25 2        
3.50 2 12.00 2 3.50 2 12.00 2 3.50 2 3.50 2        
3.75 2 13.00 2 3.75 2 13.00 2 3.75 2 3.75 2        
4.00 2 14.00 2 4.00 2 14.00 2 4.00 2 4.00 2        
4.25 2 15.00 2 4.25 2 15.00 2 4.50 2 4.50 2        
4.50 2 16.00 2 4.50 2 16.00 2 5.00 2 5.00 2        
4.75 2 18.00 2 4.75 2 18.00 2 5.50 2 5.50 2        
5.00 2 20.00 2 5.00 2 20.00 2 6.00 2 6.00 2        

Spheres
The curved surface forms a part of the spherical lens and the dioptric power on all axis positions is the same. After passing through the lens, the light beam focuses on one point (or a virtual focus). Spherical lenses includes concave lenses (-) and convex lenses (+), which are used to examine myopia, hyperopia and presbyopia.

Cylinders
The curved surface forms a part of the cylindrical lens and the dioptric power on all axis positions is not the same. After passing through the lens, the light beam focuses into a straight line (or a broken line). Cylindrical lenses consists of concave cylindrical lenses and convex cylindrical lenses that are used to examine astigmatism.

Prisms
The tangent plane of a prismatic lens is wedge shaped. After passing the lens, the light beam bends to the bottom and the object shifts to the edges. This kind of lens is used to test the ocular muscle, slant and invisible slant as well as to train the ocular muscle.

Occluder
This is a kind of opaque lens for covering the uninspected eye of the examinee in a dark room.

Frosted Lens
This is a kind of semi-transparent cover lens and mainly used for babies or used outside of the room as an occluder.

Slit
In its center there is a slit, through which light can pass while it can not pass through any other part of the lens. By turning this lens in front of the eye, astigmatism can be examined as vision changes for better or worse at a certain axis position, on the other hand, it proves no existence of astigmatism if vision does not change.

Plano lens
This is a kind of transparent plain lens and the light never bends when it passes through the lens.
It is used to examine false blindness.


Color Lens
These lenses include different colors: red, green, blue, yellow and dark brown and are used to examine color sensitivity. For patients whose dioptric image is muddy (e.g a patient with cataract), the red or green lens is suitable. It also can be used for re-inspection and examination of color blindness.

Cross cylinder
This is a kind of lens with contrary dioptric in two axis positions and used to examine the degree and axis position of the cylindrical lens for determining astigmatism. When using, put the cross cylinder lens before the cylindrical lens and make its one axis coincide with the axis position of the cylindrical lens, then turn the cross cylinder lens 90° counter-clockwise and see the change in vision. If the vision has no change, the degree of cylindrical lens used can be considered suitable, otherwise, the degree of cylindrical lens would be adjusted according to the variant results. In correcting the axis position, respectively put the two axis of cross cylinder lens at the right side (45°) and the left side (45°) of primary test axis of cylindrical lens, then turn it counter-clockwise and see differences of vision at two positions. If vision on one position is better than that on another position, the axis of cylindrical lens can be slightly turned in the direction of the position mark of the better one, then test again by the method used above, until difference in vision at two positions can hardly be distinguished, thus proving that the cylindrical lens is at the correct position.

Maddox
On its surface, there is one row of bars through which a spot of light can pass, and then bends into a line to the direction, which is perpendicular to the glass bars.

Pin hole
In its center, there is a small hole, through which a light beam passes to form an artificial pupil.
It is used to improve diopter especially the astigmatism after wearing it.
Details Specifications

Concave(-) Sphere Convex(+) Sphere Concave(-) Cylinder Convex(+) Cylinder Prism Accessory
List pcs List pcs List pcs List pcs List pcs List pcs List pcs Specifi-
cation
pcs
0.25 2 5.25 2 0.25 2 5.25 2 0.25 2 0.25 2 0.50 2 Maddax 1
0.50 2 5.50 2 0.50 2 5.50 2 0.50 2 0.50 2 1.00 2 Crossed fine 1
0.75 2 5.75 2 0.75 2 5.75 2 0.75 2 0.75 2 2.00 2 Pin hole 2
1.00 2 6.00 2 1.00 2 6.00 2 1.00 2 1.00 2 3.00 2 Occluder 1
1.25 2 6.50 2 1.25 2 6.50 2 1.25 2 1.25 2 4.00 2 Slit 1
1.50 2 7.00 2 1.50 2 7.00 2 1.50 2 1.50 2 5.00 1 Red filter lens 1
1.75 2 7.50 2 1.75 2 7.50 2 1.75 2 1.75 2 6.00 1 Green filter lens 1
2.00 2 8.00 2 2.00 2 8.00 2 2.00 2 2.00 2 8.00 1 Cross cylinder 1
2.25 2 8.50 2 2.25 2 8.50 2 2.25 2 2.25 2 10.00 1 Plane lens 1
2.50 2 9.00 2 2.50 2 9.00 2 2.50 2 2.50 2     Frosted lens 1
2.75 2 9.50 2 2.75 2 9.50 2 2.75 2 2.75 2     Double prisms 1
3.00 2 10.00 2 3.00 2 10.00 2 3.00 2 3.00 2        
3.25 2 11.00 2 3.25 2 11.00 2 3.25 2 3.25 2        
3.50 2 12.00 2 3.50 2 12.00 2 3.50 2 3.50 2        
3.75 2 13.00 2 3.75 2 13.00 2 3.75 2 3.75 2        
4.00 2 14.00 2 4.00 2 14.00 2 4.00 2 4.00 2        
4.25 2 15.00 2 4.25 2 15.00 2 4.50 2 4.50 2        
4.50 2 16.00 2 4.50 2 16.00 2 5.00 2 5.00 2        
4.75 2 18.00 2 4.75 2 18.00 2 5.50 2 5.50 2        
5.00 2 20.00 2 5.00 2 20.00 2 6.00 2 6.00 2        

Spheres
The curved surface forms a part of the spherical lens and the dioptric power on all axis positions is the same. After passing through the lens, the light beam focuses on one point (or a virtual focus). Spherical lenses includes concave lenses (-) and convex lenses (+), which are used to examine myopia, hyperopia and presbyopia.

Cylinders
The curved surface forms a part of the cylindrical lens and the dioptric power on all axis positions is not the same. After passing through the lens, the light beam focuses into a straight line (or a broken line). Cylindrical lenses consists of concave cylindrical lenses and convex cylindrical lenses that are used to examine astigmatism.

Prisms
The tangent plane of a prismatic lens is wedge shaped. After passing the lens, the light beam bends to the bottom and the object shifts to the edges. This kind of lens is used to test the ocular muscle, slant and invisible slant as well as to train the ocular muscle.

Occluder
This is a kind of opaque lens for covering the uninspected eye of the examinee in a dark room.

Frosted Lens
This is a kind of semi-transparent cover lens and mainly used for babies or used outside of the room as an occluder.

Slit
In its center there is a slit, through which light can pass while it can not pass through any other part of the lens. By turning this lens in front of the eye, astigmatism can be examined as vision changes for better or worse at a certain axis position, on the other hand, it proves no existence of astigmatism if vision does not change.

Plano lens
This is a kind of transparent plain lens and the light never bends when it passes through the lens.
It is used to examine false blindness.


Color Lens
These lenses include different colors: red, green, blue, yellow and dark brown and are used to examine color sensitivity. For patients whose dioptric image is muddy (e.g a patient with cataract), the red or green lens is suitable. It also can be used for re-inspection and examination of color blindness.

Cross cylinder
This is a kind of lens with contrary dioptric in two axis positions and used to examine the degree and axis position of the cylindrical lens for determining astigmatism. When using, put the cross cylinder lens before the cylindrical lens and make its one axis coincide with the axis position of the cylindrical lens, then turn the cross cylinder lens 90° counter-clockwise and see the change in vision. If the vision has no change, the degree of cylindrical lens used can be considered suitable, otherwise, the degree of cylindrical lens would be adjusted according to the variant results. In correcting the axis position, respectively put the two axis of cross cylinder lens at the right side (45°) and the left side (45°) of primary test axis of cylindrical lens, then turn it counter-clockwise and see differences of vision at two positions. If vision on one position is better than that on another position, the axis of cylindrical lens can be slightly turned in the direction of the position mark of the better one, then test again by the method used above, until difference in vision at two positions can hardly be distinguished, thus proving that the cylindrical lens is at the correct position.

Maddox
On its surface, there is one row of bars through which a spot of light can pass, and then bends into a line to the direction, which is perpendicular to the glass bars.

Pin hole
In its center, there is a small hole, through which a light beam passes to form an artificial pupil.
It is used to improve diopter especially the astigmatism after wearing it.

Recently viewed