Sale
Luxvision Trial Lens Set TL-266
The Luxvision TL-266 features 266 hand-crafted glass lens pieces secured in metal rings. This robust kit comes in your choice of a leather or aluminum case with removable tray, diopter indicators, and dual combination locks for security.
Wide ranging sphere and cylinder powers, two cross cylinder lenses and a variety of accessory lenses will allow you to perform better testing on your entire patient base. This classic form of refraction enhances prescription accuracy for low vision patients in particular, offering accurate vertex distance, which is very helpful for high refractive error patients. Similarly, any patient who relies on eccentric viewing and needs to move their eyes or head to see around a scotoma can greatly benefit from trial frame refracting.
* Trial Frame not Included
₲3.637.583 – ₲3.974.397
₲4.675.761
₲3.974.397
 |
Spheres The kit includes both concave (-) and convex (+) spherical lenses to examine myopia, hyperopia and presbyopia. Powers include ± 0.25D to ± 20.00D in 025D steps. |
|
|
Cylinders Examine astigmatism with the plus and minus cylindrical lenses included in the TL-266. Powers range from ± 0.25D to ± 6.00D. |
||
|
Cross Cylinder Lenses These lenses will help you examine the degree and axis position of the cylindrical lens when determining astigmatism. |
||
|
Prisms You can perform prism testing up to 10∆D with the TL-266 Trial Lens Kit. |
||
|
Frosted Lens Use this semi-transparent cover lens for babies or outside of the room as an occluder. |
||
|
Slit Lens Examine astigmatism by turning this lens in front of the eye. |
||
|
Color Lenses The TL-266 includes red, green, blue, yellow and dark brown lenses for use in examining color sensitivity. The lenses are especially helpful for use with cataract patients as well as in color blindness testing. |
||
|
Additional Lenses Maddox, plano, occluder and pin hole lenses are also included in the TL-266. |
||
 |
Security Case Select from your choice of a leather or aluminum case with the TL-266. Both designs feature dual combination locks for security. |
|
Click here to see the brochure
Click here to see the manual
Details Specifications
Spheres The curved surface forms a part of the spherical lens and the dioptric power on all axis positions is the same. After passing through the lens, the light beam focuses on one point (or a virtual focus). Spherical lenses includes concave lenses (-) and convex lenses (+), which are used to examine myopia, hyperopia and presbyopia. Cylinders The curved surface forms a part of the cylindrical lens and the dioptric power on all axis positions is not the same. After passing through the lens, the light beam focuses into a straight line (or a broken line). Cylindrical lenses consists of concave cylindrical lenses and convex cylindrical lenses that are used to examine astigmatism. Prisms The tangent plane of a prismatic lens is wedge shaped. After passing the lens, the light beam bends to the bottom and the object shifts to the edges. This kind of lens is used to test the ocular muscle, slant and invisible slant as well as to train the ocular muscle. Occluder This is a kind of opaque lens for covering the uninspected eye of the examinee in a dark room. Frosted Lens This is a kind of semi-transparent cover lens and mainly used for babies or used outside of the room as an occluder. Slit In its center there is a slit, through which light can pass while it can not pass through any other part of the lens. By turning this lens in front of the eye, astigmatism can be examined as vision changes for better or worse at a certain axis position, on the other hand, it proves no existence of astigmatism if vision does not change. Plano lens This is a kind of transparent plain lens and the light never bends when it passes through the lens. It is used to examine false blindness. Color Lens These lenses include different colors: red, green, blue, yellow and dark brown and are used to examine color sensitivity. For patients whose dioptric image is muddy (e.g a patient with cataract), the red or green lens is suitable. It also can be used for re-inspection and examination of color blindness. Cross cylinder This is a kind of lens with contrary dioptric in two axis positions and used to examine the degree and axis position of the cylindrical lens for determining astigmatism. When using, put the cross cylinder lens before the cylindrical lens and make its one axis coincide with the axis position of the cylindrical lens, then turn the cross cylinder lens 90° counter-clockwise and see the change in vision. If the vision has no change, the degree of cylindrical lens used can be considered suitable, otherwise, the degree of cylindrical lens would be adjusted according to the variant results. In correcting the axis position, respectively put the two axis of cross cylinder lens at the right side (45°) and the left side (45°) of primary test axis of cylindrical lens, then turn it counter-clockwise and see differences of vision at two positions. If vision on one position is better than that on another position, the axis of cylindrical lens can be slightly turned in the direction of the position mark of the better one, then test again by the method used above, until difference in vision at two positions can hardly be distinguished, thus proving that the cylindrical lens is at the correct position. Maddox On its surface, there is one row of bars through which a spot of light can pass, and then bends into a line to the direction, which is perpendicular to the glass bars. Pin hole In its center, there is a small hole, through which a light beam passes to form an artificial pupil. It is used to improve diopter especially the astigmatism after wearing it. |
Details Specifications
Spheres The curved surface forms a part of the spherical lens and the dioptric power on all axis positions is the same. After passing through the lens, the light beam focuses on one point (or a virtual focus). Spherical lenses includes concave lenses (-) and convex lenses (+), which are used to examine myopia, hyperopia and presbyopia. Cylinders The curved surface forms a part of the cylindrical lens and the dioptric power on all axis positions is not the same. After passing through the lens, the light beam focuses into a straight line (or a broken line). Cylindrical lenses consists of concave cylindrical lenses and convex cylindrical lenses that are used to examine astigmatism. Prisms The tangent plane of a prismatic lens is wedge shaped. After passing the lens, the light beam bends to the bottom and the object shifts to the edges. This kind of lens is used to test the ocular muscle, slant and invisible slant as well as to train the ocular muscle. Occluder This is a kind of opaque lens for covering the uninspected eye of the examinee in a dark room. Frosted Lens This is a kind of semi-transparent cover lens and mainly used for babies or used outside of the room as an occluder. Slit In its center there is a slit, through which light can pass while it can not pass through any other part of the lens. By turning this lens in front of the eye, astigmatism can be examined as vision changes for better or worse at a certain axis position, on the other hand, it proves no existence of astigmatism if vision does not change. Plano lens This is a kind of transparent plain lens and the light never bends when it passes through the lens. It is used to examine false blindness. Color Lens These lenses include different colors: red, green, blue, yellow and dark brown and are used to examine color sensitivity. For patients whose dioptric image is muddy (e.g a patient with cataract), the red or green lens is suitable. It also can be used for re-inspection and examination of color blindness. Cross cylinder This is a kind of lens with contrary dioptric in two axis positions and used to examine the degree and axis position of the cylindrical lens for determining astigmatism. When using, put the cross cylinder lens before the cylindrical lens and make its one axis coincide with the axis position of the cylindrical lens, then turn the cross cylinder lens 90° counter-clockwise and see the change in vision. If the vision has no change, the degree of cylindrical lens used can be considered suitable, otherwise, the degree of cylindrical lens would be adjusted according to the variant results. In correcting the axis position, respectively put the two axis of cross cylinder lens at the right side (45°) and the left side (45°) of primary test axis of cylindrical lens, then turn it counter-clockwise and see differences of vision at two positions. If vision on one position is better than that on another position, the axis of cylindrical lens can be slightly turned in the direction of the position mark of the better one, then test again by the method used above, until difference in vision at two positions can hardly be distinguished, thus proving that the cylindrical lens is at the correct position. Maddox On its surface, there is one row of bars through which a spot of light can pass, and then bends into a line to the direction, which is perpendicular to the glass bars. Pin hole In its center, there is a small hole, through which a light beam passes to form an artificial pupil. It is used to improve diopter especially the astigmatism after wearing it. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
