Visionare Electric Table Tavola Doppia
Counter space is often at a premium in most clinical settings, and there are often more devices than there is room to place them. Unfortunately, the solutions for this are often less than satisfactory. One can simply crowd the counters with equipment, but that makes working more difficult, especially if the device is used sparingly. Devices can be lugged back and forth between storage, but this comes with a risk of falls that can destroy expensive equipment and harm the user. Even once they are on a counter or table, ophthalmic instruments are often not at the correct height for the job, requiring the patient and the operator to adapt to the equipment. The Tavola motorized table by Visionare solves this problem by meeting the patient where they’re at, not the other way around.
The Tavola Doppia is designed for for a two instruments in mind. The motorized table is a wheeled table for exam rooms that contains a motorized lift to elevate or lower equipment as needed.
Height is controlled by an up/down switch just under the tabletop, allowing for quick access without the risk of accidental bumps or activations. With its adjustable height ranging from 26 in to 39 in, the Tavola Doppia can meet the needs of most seated patients without asking them to adjust, providing them extra comfort and the operator less of a hassle.
Additionally, the table raises or lowers at 1.18 in/s, slow enough to protect delicate equipment but quick enough to not waste time.
The Tavola Doppia can support up to 110 lb on the tabletop.
The table Tavola Doppia provides easy access. Simply roll the table to your desired location and lock the wheels as needed.
With these features, options, and Visionare dedication to quality, the Tavola Doppia table is the ideal solution to maximize working space without compromising convenience.
Plane Tavola Doppia
Click here to see the brochure
Click here to see the manual
| Height (without table top) |
Min* 26" Max* 39" Stroke* 13" |
| Dimensions (without table top) | Width 24" Depth 16" Weight 39.6 lbs |
| Elevating Speed | Load dependent 0.78-1.18 in/s |
| Table Lifting Power | Max 110 lbs |
| Height Adjustment Mechanism | Electrical |
| Height Adjustment Control | Up/down switch, sited under the table top |
| Power Supply Voltage/Frequency | 115/230 V ~ 50/60 Hz |
| Current Absorbed Without Connected Instruments |
220-240 V~ version: max 0.8A 115 V~ version: max 1.6A |
| Current Absorbed with Connected Instruments | Max 3A |
| Main Fuse Located in the Fuse-Holder Sited Next to Power Cord Socket | T 4A 250V 5x20 |
| Duty Cycle of Electrical Motor | Max 10%. After continuous operation of 2 min it must be cooled down for at least 18 min. |
| 2 auxiliary max 200W voltage power supply sockets for instruments *Can slightly vary |
|
Plane Tavola Doppia
| Height (without table top) |
Min* 26" Max* 39" Stroke* 13" |
| Dimensions (without table top) | Width 24" Depth 16" Weight 39.6 lbs |
| Elevating Speed | Load dependent 0.78-1.18 in/s |
| Table Lifting Power | Max 110 lbs |
| Height Adjustment Mechanism | Electrical |
| Height Adjustment Control | Up/down switch, sited under the table top |
| Power Supply Voltage/Frequency | 115/230 V ~ 50/60 Hz |
| Current Absorbed Without Connected Instruments |
220-240 V~ version: max 0.8A 115 V~ version: max 1.6A |
| Current Absorbed with Connected Instruments | Max 3A |
| Main Fuse Located in the Fuse-Holder Sited Next to Power Cord Socket | T 4A 250V 5x20 |
| Duty Cycle of Electrical Motor | Max 10%. After continuous operation of 2 min it must be cooled down for at least 18 min. |
| 2 auxiliary max 200W voltage power supply sockets for instruments *Can slightly vary |
|
Plane Tavola Doppia
